Marshmallow Mini Gun

Supplies you will need for this project:

1 piece of 1/2 inch pvc pipe (at least 35 inches)
2 (1/2) inch tees
2 (1/2) inch end caps
1 (1/2) inch 45 degree elbow
1 (1/2) inch slip adapter
1 (1/2) inch coupler

Directions:
First you will take your pvc and cut:

(3) 5-inch pieces
(1) 18-inch piece
(2) 1-inch pieces


Now you will take a 5-inch piece and add a coupler on one end and a tee on the other end. Then on the other end of the tee attach the 18-inch piece. After that put a five inch piece on the bottom of the tee and put a cap on the end of  that five inch piece. Now on the other end of the 18-inch piece put a tee and on the bottom of it put a 5-inch piece of pipe with a cap on the end. Then you put a 1-inch piece on the other end of the tee. Now on the end of that put a 45 degree elbow upright and a 1-inch piece on the end of that. Then attach your slip adapter. So now you have a fun marshmallow gun for friends and family.