Pvc Target Stand

 This is what you will need for this project:


(2)  1/2 in. tees
(2)  1/2 in. 90 degree elbows
(4)  1/2 in. caps
1 piece of 1/2 in. pvc (at least 108 inches)



First you will need to cut your pipe to these lengths:


(4)  6 inch pieces
(2)  2 1/2 foot pieces
(1)  2 foot piece



Now you will take one tee and add a six inch piece on each end of the tee and a cap on the other end of the six inch pieces. Then put a 2 1/2 foot piece on the top of the tee. Now on the top of of the 2 1/2 foot piece, put a elbow and now repeat that process. Now you have two big pieces.Next you will connect them at the top with the 2 foot piece on the elbows. Now you have your self a nice homemade target stand. Red solo cups can be connected with thin rope.

<<<<<>>>>>